Tan Silica Dioxide Cloth. Temp Rating 1800 degress (F) Melt 3000 degrees (F) Wt/Sq. Yd 18 oz. Thickness .030". USE: Sparks, spatter, and slag. Blankets are manufactured with #2 brass grommets (3/8") on four sides, at approximate 24" centers Finished blanket size may vary by approximately 3" to 4" in height and width to allow for hems and joining Grommets are not provided on Silica cloth, Velvet Shield or leather unless requested Sewn-edge hems are not provided, or necessary, on Leather or Velvet Shield Blankets. 3" to 12" should be allowed for ventilation at the bottom of curtains in welding installations Specify finished size if required (Blankets and Curtains finish approximately 3" to 4" shorter in each direction) Add 10% to the width of hanging curtains to allow for proper drape Custom grommet placement is available To order without grommets, add NG to suffix of part number (example: 37266-NG). WARNING: The information for blankets and temperature ratings are intended to be used as guidelines only and not as a guaranty of performance. The user must determine product suitability for the specific application, and assume all risks in connection therewith, as each application varies. Molten metal temperatures exceed 1500 degrees(F). Oxy-fuel or Plasma cutting processes flame, pilot arc and cutting stream generate temperatures above 3000 degrees(F). Acrylic and silicone coated blankets are not for use within proximity or direct contact with temperatures of 200 degrees(F). Velvet Shield® is not for use within proximity, direct contact, or for extended period with temperatures of 200 degrees(F). Use caution to prevent blankets from accidental contact with flammable liquids that would ignite if exposed to sparks. Temperature rating for acrylic and silicone coatings is for the base material. All Steiner blankets and roll good materials should be used only as protective material for welding applications.
Find Similar Products by Category
Customers also viewed